Alexia 'Evo' with PID Controller

New features

PID with shot timer: allows for temperature control and extraction timing
Pulsar added: makes the pump 25% quieter
Boiler drain: allows for boilers to be completely drained for service or shipping
T.E.A. Coated Boilers: protection process drastically reduces possiblity of leaching of metals
Custom Knobs: Easier to use, and more aesthetically pleasing to the eye
Non-compression valves: easier to use and less expensive to repair than compression valves
No Burn Steam Wand: Cool Touch, does not burn hands, and milk does not build up on it

Additional changes

The steam arm: The previous steam arm only swung side to side. We replaced it with a swivel one and added the same two-hole steam tip found on our Anita.
The micro-switch under the water tank: We replaced it with the reliable and proven magnetic float sensor we use on the Anita and Andreja Premium. The magnetic sensor is not only very accurate and dependable but by using it, we can eliminate the springs and tray the water tank sets on. By eliminating those two items, the machine is much quieter because there is less to resonate when the pump is activated.

Resettable hi-limit: The previous fusible link has been replaced with a resettable hi-limit. In the event the hi-limit is tripped you can correct the cause and simply press down and reset the limit and you are back up and running without having to replace a fuse.

The gauge of all of the internal wire: The Eliane as a 110 volt espresso machine draws more current with the same size heating element. Therefore, we increased the wiring size so that it can easily handle the current.

The drip tray and its cover: We made it like the one we have on the Anita, Andreja Premium, and Vetrano: Large capacity, no-splash cover, and easy pull-out access.


Model: Alexia
Manufacturer: Quick Mill
Best Use: Office/Home

Automation: EE/Semi-Automatic
Boiler: Single insulated boiler with T.E.A. coating (0.75 liter)
Cup Size: Traditional cup
Groups: 1 Group
Output Capacity: 20 espressos per hour
PID Temp Controller: Yes
Plumbing: Reservoir (3 liter)
Pump: Ulka 52 watt vibratory pump with thermal overload protection

Drain Tray: Large non-plumbed pull-out stainless drip tray with 46 oz capacity
Hot Water Spigot: 1 hot water spigot
Steam Arms: 1 stainless steel swivel no-burn steam arm / 2-hole steam tip

Height: 15.25 inches
Width: 9.00 inches
Depth: 15.75 inches
Weight: 38 lbs

Amps / Volts: 15 Amps / 110 Volts
Watts: 1400 Watt heating element

Colors: Stainless steel
Features: Hinged Cover - No need to remove the cup warming tray to refill the water tank. Easy Access Expansion Valve - No need to remove the outer shell to adjust. Three Position Power Switch (left - power on for initial fill, center - power off, right - power on and heating). High-quality stainless steel construction #304. E-61 commercial group. Cup warmer Dual-purpose pressure gauge. Precise magnetic switch detects low water level.
Includes: Two complete 58 mm portafilters (one single and one double). Blank portafilter for backflushing.